50.4V 1.5A Charger Input 110-220V for DIY 12S 44.4V 43.2V 49V Battery Charger for Cordless Lawn Mower

To make your batteries last 10X longer, avoid using batteries below 35% and don’t charge above 85-90%INPUT SPEC:AC100-240V 50/60HZ 0.8A charging voltage:DC50.4V charging current:1.5A Charging mode:CC-CV charge indicator:Charging the red light is full of green light Charger port:DC5.5*2.1 product size:132*57*32MM package include: 1*charger 1*cableUse and maintenance of the charger : 1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug. If you pull the battery plug first while charging, especially when the charging current is large (red light), it is very easy to damage the charger. 2. When the LED light turns green, please continue charging for 2-3 hours. 3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged. 4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting, which is conducive to the activation of long-term immobile material in the deep part of the battery. Luminous means that riding the controller battery undervoltage protection action. 5. If your battery has not been used for a long time (2-3 months), please charge the battery before using it. Make sure your battery is not broken. 6.Please use the charger in a dry place in time. 7.When you do not use the charger, do not always connect the power supply. 8.Please confirm your battery, Because it is used to charge the lithium battery. Do not use the charger on the LiFepo4 battery, otherwise the charger will be got incredibly hot.

• Input: 100-240VAC,50/60Hz, Output: 50.4V 1.5A Power
• 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum. The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking
• The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable
• The Charger protected: Our product is equipped with ‌thermal protection‌ and ‌overload protection‌ to prevent charging issues caused by overheating or excessive current; red light -- charging, green light -- charge OK, it stop automatically when the battery is full
• Replace your broken charger or add an extra charger to charge in 2 locations without taking the original charger with you
• To make your batteries last 10X longer, avoid using batteries below 35% and don’t charge above 85-90%